View Single Post
Old 1st November 2019, 11:39   #4
tourer
Posted a thing or two
 
Rover 75 Tourer CDT Auto.

Join Date: Oct 2011
Location: Long Eaton
Posts: 1,343
Thanks: 30
Thanked 220 Times in 160 Posts
Default

Quote:
Originally Posted by Arctic View Post
Hi Richard.
You will need a couple of rags, to wrap round the fuel pipes that you unplug from the top of the fuel filter low pressure pump.

An 8mm ring spanner to undo the little bolt holding the clamp to the filter.

Unplug the wiring to the filter pump at the front, it can only fit in one way.

Once you have removed the pump & filter together use a large rag over the filter pump lid, then twist the filter off, watch out for spillage.

Before fitting the new filter add a little diesel to the O-rings on the filter line it up and spin it, once it's up to the top turn with hand only until you can no longer turn it.

Fit it back to the car reverse of removal, then ignition to II do not start the car, do this for about 30 seconds repeat four times, then on the fifth time start the car it should run smoothly, leave running for about 5 mins job done.

Another of my how to's that as been destroyed by PB.
https://www.the75andztclub.co.uk/for...d.php?t=104654
Hi,
What is PB?

Cheers.
tourer is offline   Reply With Quote