Quote:
Quote:
Originally Posted by madeupname
Hi All, I now have the same problem with my 2.0 cdti. No turnover, not even a click but lights and locks working.
I had an additional problem of the bonnet pull flapping. Managed to get the bonnet up and put a tie wrap on the single cable, that solved that problem.
My car is parked at the far end of the road so I can't nip in and out with dismantled bits.
How do I get to the starter motor on this car?
Thank you.
|
|
HI Adrian.
engine cover off, three bolts, then look below and in the middle of the manifold and you will see the starter motor, pull the spade end off clean up and re-fit see if the car starts.
1
2
If this does not start the car then give the starter a tap with the handle of a screw driver, see if it starts.
Most likely the starter needs new contacts and plunger, to remove the starter will take about 45 minutes the first time you have ever taken one off.
3
4
5
6
how to on here somewhere.