Quote:
Originally Posted by damydyo1
Al, can you make some visuals  I don't understand the type of satnav you have. (high line or low line?) and don't understand the SMB cable. Also your aerial on the radio module (not the head unit) is it connected to the right wire, because there are different aerials in your rear screen. There are two for the TV-module (diversity amp at the left side) and one for the radio module. The aerial for the radio is mounted on the right side of your rear screen, looking from inside out. The radio aerial goes to your dash but must be included in your loom, leading to your boot, where youre radio module will be mounted (high line). If you have a low line, you can simply connect the aerial wire in the head unit coming out from the dash.
Regards Ralph  |
Ralph
I am trying to connect hi-line to one of Rovers last radio offerings. On the hi-line radio module there is the normal radio connection as well as an smb socket similar the pair that are in the TV module. Should anything be connected to this? Also on the tourer the amplifier is not on the pillar as expected, it seems to be well into the head lining somewhere as the attachment is of course from the side window (as you say) not the rear. Will the TV connection be in the same place? I will bring the connection from the dash as suggested.
Dave, thanks for those pointers will follow up today (if I can locate the amp) and see where it gets me.
Al