Hi there. I wouldn’t use copper grease as it will dry out and you will probably end up doing the job again in a short space of time.
My choice would be red rubber grease or a slight amount of silicone grease.
I only use copper grease on the back of pads and bolt threads.
Some of the more knowledgable will be along to answer shortly 👍🏻
__________________
15,577th ZT to run off the production line, out of 18,894
703rd ZT 120 to be made out of 921
66th ZT in Aquamarine (Goodwood) (code: HQM) to be made out of 189 Aquamarine (Goodwood) ZTs
|