Quote:
Originally Posted by macafee2
No not really. You should run a power cable from the front as only minimal power is taken from the harness. This small amount of power is detected by the relay and it uses power from your new power cable to provide power to the road lights. I am not sure where my handbooks are as I am in the process of moving house otherwise I would tell you which fuses on a Face Lift fuse box I used
Not knowing which relay you have but a TEB7AS is quite common, this link shows how to wire it
https://www.towbarandtrailercentre.com/wiring-diagrams
macafee2 |
thanks for your help macafee2 the the tow bar i have fitted i got on ebay it'a from a rover 75 and the relay is a PCT LOGICON ZR2500 it looks like the one in your post narrower and longer but all the wiring looks identical i may have a go at fitting it as i said i would have prefered it albeit it is just a little trailer i have but you never know when something else would be getting towed your input is very much appreciated George