The 75 and ZT Owners Club Forums - View Single Post

whitevanman · 12th September 2014, 21:22

OK,

So i've got some projectors that need the usual lens clean but on inspecting them they have a lot of crud inside the lens including water marks to the lowers which will also need cleaning, I've undone the clips but the lenses appear glued on is this normal? If they are glued and are difficult to seperate I may not bother due to risk of damage..

I would guess they have got like this due to someone in the past losing the rubber backing piece to the bulb holders..

Any advice welcome..

By the way they are not Xenons if that matters..

Cheers
Steve

12th September 2014, 21:22	#1
whitevanman This is my second home 2001 Connie SE CDT, 2002 2.0Petrol Laguna SportHatch Join Date: Jul 2011 Location: Althorne Posts: 3,122 Thanks: 319 Thanked 441 Times in 318 Posts	Projector headlight seperation? OK, So i've got some projectors that need the usual lens clean but on inspecting them they have a lot of crud inside the lens including water marks to the lowers which will also need cleaning, I've undone the clips but the lenses appear glued on is this normal? If they are glued and are difficult to seperate I may not bother due to risk of damage.. I would guess they have got like this due to someone in the past losing the rubber backing piece to the bulb holders.. Any advice welcome.. By the way they are not Xenons if that matters.. Cheers Steve __________________ [SIGPIC][/SIGPIC] Today the 23rd of April I will mostly be: Kids, bikes, dog, kids, bikes, dog...Seems to be a pattern forming here Car: Connie SE CDT Manual, Mods: O-Rings, Silicon intercooler hose, Stainless EGR Bypass, BMW PCV Mod, 160 Upgrade, DD Unit, Projector Headlights, Powerflex Bottom Mount, Remote Clutch reservoir, SS Compensator; Inline Stat To Come: cat gut (when replacing iffy section). Meteors after refurb..