Quote:
Originally Posted by Arctic
Those have been tried several times at our Nano meets and failed miserably, as they could not be tightened up enough, if you can they seem to pull through so air on the caution side.
|
cheers Arctic. I make some inserts out of I think Nylon or some sort of "plastic" rod. They were tight fitting with some Super Glue added
. I then used the fix that... was it you suggested, to add some metal brackets to the broken "lugs" on the tail light cluster. I also drilled and bolted the bracket in place as well as super glued it. I then used a self tapping screw thru the metal and into the "Nylon" insert.
When I removed the cluster and saw the butchers hole in the chassis, I was at a loss on how on earth I was going to over come it.
macafee2