The 75 and ZT Owners Club Forums - View Single Post - Rover 75 & MG ZT Rear Number Plate Light Lamp Plinth Circuit Board

Mickyboy · 15th December 2017, 20:21

https://www.homebase.co.uk/kincrome-...-piece_p388456

I can’t remember off the top of my head but this set will have the correct security torx bit to fit and only for £10.45 I’ve used these loads and they are good value, I also have a decent blue-point set but they are much more expensive and not viable for a odd job.
Anyway here’s the link at the top
Mick

15th December 2017, 20:21	#2
Mickyboy SERVICING AND DEALER DIAGNOSTICS MG ZT CDTI 135 + & MGZT CDTI AUTO 160 & ROVER 75 TOURER CDTI 160 TROPHY YELLOW Join Date: Aug 2013 Location: Hernebay Posts: 4,331 Thanks: 818 Thanked 2,414 Times in 1,141 Posts	https://www.homebase.co.uk/kincrome-...-piece_p388456 I can’t remember off the top of my head but this set will have the correct security torx bit to fit and only for £10.45 I’ve used these loads and they are good value, I also have a decent blue-point set but they are much more expensive and not viable for a odd job. Anyway here’s the link at the top Mick __________________ [SIGPIC][/SIGPIC] T4 Owner Jobs done : new UBP, Spy hole mod, Rear hub(wheel bearing),plenum cleaned and emptied, Inline thermostat fitted,Full service, In car Digital tv/DVD Bluetooth Satnav etc, Replaced UBP, Restored headlights,Fixed airbag connection.replaced HP pump,replaced rear light seals,changed intercooler O rings. Jobs to do: ,replace drivers lock,.[/SIZE]