Quote:
Originally Posted by Blink
Great post TC. I agree with Jon - it should be added to the HowTo section.
|
I believe the only way to get anything into the HowTo section is for a mod to do it. Maybe they will - ?
Quote:
I've already got the old pipes out (not factory originals) - I mangled them in the process so they're of little use now for templates. - - - - I've got good (ish) access to the firewall run from the modulator because there's no gearbox, drive shafts or anything else on the car.
|
Yes I see that now. Pity really because making a spot-on duplicate is quite satisfying. You'll just have to work in the space you have, bend a bit test a bit - it doesn't have to look very pretty to pass the MOT. As long as there's no chance of it fouling anything that moves.
Making a template from stout wire sounds like a good plan.
Quote:
Is the 10x1mm fitting on the modulator end the same as the fitting on the hose union end - or are they different lengths?
|
They're the same - 10x1mm, DIN, short length. The connectors sold on eBay, etc. are generally the 'short' type unless specifically described as 'long'.
TC