I'll add my post if you don't mind, it may get more replies.
https://www.the75andztclub.co.uk/for...23&postcount=1
Also as a bit of a 'how to', remove card, separate the pieces, peel off the thin material and scrape (nasty sticky job) the orange gum off. Cards are fixed (sometimes three pieces) so the plastic rivets need removing to separate the covered area. Lots of headlining material available on ebay, 2mm foam backed all colours. A can of spray adhesive and you're ready to go. Fix material to the most severe curve first and smooth out, only glue a small area at a time and wait a couple of minutes or the glue will show through if it's still wet. Hope this helps, good luck.