Quote:
Originally Posted by Heddy
Cheers, will try that as a last resort, been looking at ferrite coils to wrap around the wires or a type of shielding.
|
Quote:
Originally Posted by Devilish
The Nextbase clf pointed out is about as good as they come if you need to re route the supply, and upgrade it.
If you are going to try FC's, buy 5 cores and attach them as close to the camera as possible, adding them one at a time.
|
I tried ferrite coils prior to getting the Nextbase power supply, on my rear camera, the front did not affect the signal (but it did have its own issues).
I should have stated though, prior to spending money on anything, unplug the lead from the dash cam, to see if that improves, whilst the lead is powered up. If it does improve things, a ferrite coil is unlikely to help. If it doesnt change, a ferrite coil may help, but rerouting may also help too - but a quality power supply would almost certainly eliminate it.
Moving the DAB aerial may also help too. Keep in mind, with a DAB signal being digital, it will drop out to silence if there is interference. (it is I/O or on/off).