[mgzrjake]

[QUOTE=Arctic;2828133]

E]

Hi Eddie


Oven cleaner foam, remove the manifold and EGR, once its off the car remove the MAP sensor, remove the rubber seals they can be re-used, remove the EGR, scrape out most of the large gunk and then fill with oven cleaner.
1

let this soak for at least 2-3 hours more if you can adding extra cleaner as you go, once it as soaked jet wash it out.
1a

Manifold may look like this.
2

3

Make sure its clean inside.
4

Clean the EGR out with an old tooth brush & Swarfega, again after removing the large deposits of gunk.

The EGR could look like this ?
5

You want it like this.
6

Wipe the MAP sensor over with a rag sprayed with carb cleaner do not poke anything into the hole.
7

I usually have at least five ready for our meets.
8

9

That’s fantastic arctic what’s the cost for the complete unit.

Jt