Quote:
Originally Posted by Typhoon190
So unfortunately my typhoon tourer filled with water over winter and I need to strip the interior out to dry it thoroughly. The issue I have is I can't get the front electric seats out because the bolts are covered. As there is quite a lot of water still in the bottom of the car, I'd rather not play with electrics. Is there a non destructive 'drill' method and could someone point be in the right direction please? Thanks in advance. Ben.
|
Pull the wire cables from the motor under the front of the seat, then attach a drill (Or wind by hand if you have an hour to spare) Make sure you do them equally or the seat will twist in the runners.