View Single Post
Old 8th August 2019, 14:51   #4
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,265
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Quote:
Originally Posted by Mr Toad View Post
... I suppose it is 3 speed in that case wouldn't I be better off replacing the whole fan with a new 2 speed one.
In my view, no you wouldn't. My reasons for saying that are:
  • A new 2 speed system is expensive. A set of brushes for your 3 speed cost £20.
  • You don't have an unreliable resistor to worry about with the 3 speed.
  • The 2 speed is noisier than the 3 speed.
Quote:
On the V8 you have to cut the shroud to clear the aircon pipes ... I assume it is the same for the KV6 ...
You will read posts which say that it is, but with a bit of ingenuity and by taking my time I managed to re-brush my 3 speed fan motor without cutting the shroud.

If you do decide to replace rather than repair, perhaps you'd consider offering your removed 3 speed to Arctic.

Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote