The 75 and ZT Owners Club Forums - View Single Post

StewartIngram · 27th July 2021, 08:14

Pull the fuse out. Lay it flat (just for reference purposes). Then either (or maybe both...I've done quite a few either way over the years) :-
1) with a pair of pliers, twist the left blade a little clockwise, and the right blade anticlockwise. Just enough to give a bit of resistance when pushing it back in
2)Instead of twisting, bend the left one up slightly, and the right one down slightly. Again, just enough to make it tighter.
Simples!

Stewart

27th July 2021, 08:14	#2
StewartIngram Gets stuck in Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008 Location: Chatteris, Cambridgeshire Posts: 904 Thanks: 320 Thanked 159 Times in 127 Posts	Pull the fuse out. Lay it flat (just for reference purposes). Then either (or maybe both...I've done quite a few either way over the years) :- 1) with a pair of pliers, twist the left blade a little clockwise, and the right blade anticlockwise. Just enough to give a bit of resistance when pushing it back in 2)Instead of twisting, bend the left one up slightly, and the right one down slightly. Again, just enough to make it tighter. Simples! Stewart Last edited by StewartIngram; 27th July 2021 at 10:54..