Quote:
Originally Posted by vitesse
An extract from the only users guide I know of:
1. Click on the “LCM” module button
Daylight Running Lights.
Switches on dipped beams at 30% brightness with ignition even with lights switched off.
WARNINGS: May not be acceptable for MOT. Multiple reports that enabling this option using current version of TOAF causes side lights to remain non-functional after the option has been disabled, requiring a restore from the backup you’re just about to make.:
2. Click the “Backup” button and save the file.
3. Scroll down to “Other” and expand with “+” symbol on left.
4. Find “Automatic Light”. There are options for Disable, Enable 30%, On engine start or On ignition.
5. Save (again, make sure you have a backup of the original configuration first).
As above, back-up the LSM and if things do go wrong you've always got the ability to "restore"
Good luck
|
Thanks for the response, however the wise would do well to take notice of the warnings, as such i am reluctant to experiment lest i cause problems, i have never been fond of restoring from backups in any case, thanks to all.