For anyone following this query of mine I thought an update might be helpful if they have a similar challenge.
I have now fitted these hangers and used the following sequence.
First I removed the securing nut & bolt and carefully spread open the bracket around the back box. This gives more space to manipulate between the back box and the hanger supports
Then push on the rubber hangers to the hanger supports under the car - using rubber lubricant and quite a lot of force!
Finally (still using rubber lubricant) pushed on the bracket hanger supports onto the fitted rubber hangers in turn, first nearest the side of the car.
Forming the bracket around the back box again and refitting the nut & bolt completes the job.
|