Your text messages to the GSM should be:-
R1on this will start the FBH regardless of the outside temp
R1off will turn it off again
R2on will turn on the ATC unit
R2off Will turn off the ATC unit
ZZ will start the process of first starting the FBH. It will run for 5 minutes then the ATC will be turned on. They will both run for 20 minutes then shut down (to avoid flattening your battery.
ZS will stop the sequence.
REMEMBER, it is important that if you use R1on or R2off for testing purposes, you must turn it back off with the R1off or R2off command or it will stay on indefinately. There is no 20 min timer on these settings.
I just leave my ATC in the auto position and never turn it off anyway.
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual)
160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control.
BORN
Tuesday, 5th October 2004 @ 12:35:52
This vehicle was the 104,679th 75 to run off the production line, out of 112,381
This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744
This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s
Last edited by Mike Trident; 4th October 2019 at 04:59..
|