Latest TOAF Error Codes
Having checked via TOAF these are the two main engine error codes...
P1646 - ECM- CAN Bus missing node-Transmission Control Module
P1647- ECM- CAN Bus missing node - Instrument Control Pack
When expanded the errors both show the same...
-signal out of range
-Sporadic error
There is also a related error on the IKE
F4 CAN Bus 244
-Open Circuit
-Sporadic Error
Does this sound like its just a cable issue (shorting) or is it more likely to need an ECM repair?
Cheers
Paul
__________________
Still figuring out where this last nut goes...
|