The 75 and ZT Owners Club Forums - View Single Post

cbr1100xx · 21st June 2019, 14:24

Changed the lower engine mounting again.
At the 3rd attempt , all is well.
1st attempt was fitting a poly bush with the original insert and it was terrible, lots of vibes , rattles and clunking on gear changes.
2nd attempt was poly bush with metal insert , same result as 1st attempt.
3rd attempt , fitted one from mat and pleased to report no more rattles , no vibes and gear changes are nice and smooth.

There is no damage on the poly bush and the only difference I can find is the width of the poly bush is 1.5mm wider and sits slightly proud of the insert

Stan

21st June 2019, 14:24	#10469
cbr1100xx Gets stuck in VW touareg Join Date: Mar 2015 Location: dunsop bridge Posts: 870 Thanks: 225 Thanked 414 Times in 235 Posts	Good vibes Changed the lower engine mounting again. At the 3rd attempt , all is well. 1st attempt was fitting a poly bush with the original insert and it was terrible, lots of vibes , rattles and clunking on gear changes. 2nd attempt was poly bush with metal insert , same result as 1st attempt. 3rd attempt , fitted one from mat and pleased to report no more rattles , no vibes and gear changes are nice and smooth. There is no damage on the poly bush and the only difference I can find is the width of the poly bush is 1.5mm wider and sits slightly proud of the insert Stan __________________ WE WERE BOTH BORN ON THE 4th of JULY CAR DIED 15/11/2022---I'M STILL GOING (JUST)