Kv6 fuel feed pipe to injection rail ?
Hi folks,
Still awaiting parts to turn up, thankfully the seals for the fuel feed pipe arrived.
The pipe in question is a metal pipe that clicks into the end of the fuel feed pipe that is held in place with a metal clip and a few seals and spacers.
Because my.old seals were in a poor state when removing the feed pipe, it's hard to determine whether I have inadvertantly lost one spacer.
Here is a snapshot from someone working on their zs V6
I have the metal.securing clip
Plastic spacer that has a wider base at one end to sit flush against the metal clip
O ring
Second o ring
I'm sure between the two o rings there should be a really tiny spacer but.. I maybe missing this piece and I would sooner have this spacer in place despite it appearing very tight and secure at present time.
If anyone can confirm that there should be two small black plastic spacers or any pics etc
Thanks
Rob
|