Quote:
Originally Posted by raykay
As I read post 4, the switch contacts were 'bridged', rather than connected to Earth.
|
Ah, thanks for pointing that out Ray. I was going by Harry's preceding post no. 3 but you are right.
So as I understand it James, the LH reversing lamp from C0296-17 works but the RH (from C0286-15) doesn't. You say the earth connection is shared by both.
When you're measuring the voltage at pin 15 with bulb fitted (0v) and removed (12v), is the voltage at pin 17 (LH bulb) constantly 12v?
Please continue to use your voltmeter for this test.
Simon