Quote:
Originally Posted by marinabrian
Ian with the hydraulic line split, you won't be able to press the pedal down at all
Did yoo remove the poppet valve in the end of the piston and ensure the gallery was clear?
Brian
|
I did not remove the valve but blew from the cylinder to outlet and from outlet to master and saw a spray of fluid leave at both ends.
Brian, I'm thinking that if fluid is passing around the seal at the end of the plunger and staying in the master cylinder and not going along the hydraulic line, that I will be able to press the pedal down, am I putting 1 and 1 together and getting 3?
macafee2