If it's the same as mine was, the play is actually in the lower bush, not the top bearing.
Mine caused horrible vibrations and a droneing noise at tickover on a CDT.(RHD)
It took me years to realise it was the column causing it after trying everything else.
Rimmer's were selling brand new LHD columns for £25 + vat. All you have to swap over is the rubber boot from the old column.
Noise and droning gone.
Wasn't actually a bad job to do .
This was nearly 5 years ago.
Last edited by tourer; 17th September 2020 at 17:56..
|