Quote:
Quote:
Originally Posted by matchless
Hi,
I have just replaced the bonnet switch with a new one from Rimmers, as my dash and alarm was indicating it was open.
This has not cured the problem, so I am wondering if the switch is on part of the loom that can be unplugged and replaced (the loom that is).
I am hoping its just a damaged loom.
Thanks
Paul.
|
|
Hi Paul.
Also posted on your wanted thread the same as below
Open the bonnet hold down the bonnet switch or get someone to do it while you try and lock the car, if it works then you know that the bonnet is just not pushing down on the switch enough, check the locking latches are free and the half moon moves freely, if so then adjust the bonnet stays turn them in a thread at a time.