Quote:
Originally Posted by bikerdude666
What I need some advice on is the aircon ... So what could be the problem cause no drop in revs, no change of engine sound?
|
Hi Derrick,
From what you've described I don't suspect a fault with your air conditioning. When the compressor engages (both parts of the pulley spinning) it's normal for the engine revs to drop slightly. As you change the temperature display inside the car, the compressor may stop and start at different settings. This is normal.
As
T-Cut says though, it sounds as if your resistor has failed.
Quote:
Originally Posted by bikerdude666
And what exactly does it mean when there's no change when bridging the pins on the 'Trinary switch'?
|
If you tell me the colours of the wires which you bridged I will be able to explain.
Simon