All the odd plastic stuff printed now, a few changes to the Hot end and the X carriage, now all red plastic..
gone from a Bowden drive to a direct drive extruder design. so the same as my little wooden frame printer thats made all the bits..
This one from amazon,
Just wiring and where to put the Electronics boxes .
and which LCD display to use?
Oh and all the Marlin programming to set it up, Version 2 has just been released with lots more features so going to have to learn it all again !
Only got a Standard 210mm square bed at the mo, but the frame will do another 50mm or so in the X and 100 in the y and total of 320 in the Z ( up) , but finding a not standard bed is hard work . might have to make one .