Quote:
Originally Posted by trikey
Undo the nut that holds the bottom of the shock absorber to the hub.
If you have a rear anti roll bar fitted then loosen the bolts holding the subframe on the side you are working on, this will give you a little more room.
Press down on the upper arm and you will be able to ease the spring out.
|
Hello Andy
Just checking .... same method possible on the saloon?
Haynes manual suggests lots of other bits need loosening / undoing (I know I know...! )
Tia
John
__________________
.
My 2.5 V6 Connoisseur SE Auto 75 is the
• 20,516th 75 to be made out of 112,381
• 787th 2.5 V6 Connoisseur SE to be made out of 3,671
• 1,248th Wedgwood Blue Metallic (code: JBH) to be made out of 7,515 code JBH 75's
|