Quote:
Originally Posted by Blink
Do you mean through these holes?
The shortest extension I've got is 120mm long, or 140mm including the 15mm socket. It's a mile too long to get round the fuel tank so I'll have to buy a shorter one.
Can you do me a favour and measure the one you used (with & without the 15mm socket)?
NB. I don't need to get the bolts out of the subframe - I just need to slacken them off by one or two complete revolutions (or enough to 'undo' the current 120Nm torque). Once I've done that I'll jack the trailing arms up, then re-tighten the bolts to 120Nm.
Good idea but I'm not taking the bolts out (thankfully!).
|
Sorry don't want so much repeat just this
NB. I don't need to get the bolts out of the subframe - I just need to slacken them off by one or two complete revolutions (or enough to 'undo' the current 120Nm torque). Once I've done that I'll jack the trailing arms up, then re-tighten the bolts to 120Nm.
but ARE you sure they not strenght bolts ? if they are you HAVE TO REPLACE them.