The 75 and ZT Owners Club Forums - View Single Post - Front hub nuts

rrobson · 4th July 2020, 11:45

Undo by knocking the tab out on the nut and either using an impact gun or a 3 foot bar and jumping on it if required.
Fitting being a reverse. A good pull on a decent breaker bar will provide plenty of torque. All that’s required to torque to 350nm is 35kg on the end on a 1m bar, or 70kg on a 0.5m bar. Then re-tab.

4th July 2020, 11:45	#2
rrobson I really should get out more....... 75 tourer cdti, MG ZS 180, nissan terrano & 1.8t rover 25 Join Date: Feb 2010 Location: Pontefract Posts: 2,644 Thanks: 17 Thanked 295 Times in 218 Posts	Undo by knocking the tab out on the nut and either using an impact gun or a 3 foot bar and jumping on it if required. Fitting being a reverse. A good pull on a decent breaker bar will provide plenty of torque. All that’s required to torque to 350nm is 35kg on the end on a 1m bar, or 70kg on a 0.5m bar. Then re-tab. __________________ How to view a car - everything you need to help you inspect a used car VIS motor tester avalible to local members Injector removal tool and auto gearbox pressure tester now available