Quote:
Quote:
Originally Posted by bl52krz
Both myself and my friend would like to thank Steve (Arctic) for changing both our inlet manifolds this morning. Job well done. My friends map sensor was blocked solid and built up, mine had a small hole still showing, but was almost blocked. The egr on both were contaminated, but not to any degree like some have been. The manifolds were not like Steve had seen in some cases, almost ful of gooey carbon. All in all, we were both quite pleased that the main contamination in the manifold was not apparent. Thanks again Steve. See you at the Nano Meet 21st March.
|
|
Hi Dave.
Certainly not as bad as these below that's for sure.
1
2
Manifolds will now be scrapped out and have a soaking in oven cleaner, the EGR have joined the others dosed in engine cleaner, they will be brushed out with Swarfega tomorrow wiped out then finished off with carb cleaner.
I would say your MAP sensor was about like this below, left in photo.
3
John's was like this.
4
As talked about today Dave some come out more carboned that others.
5
Your manifold was about par with this one.
6
John's this one
7
Will post them up once cleaned
cheers Arctic.