Quote:
Originally Posted by p2roverman
Fitted a replacement fronr to to the unique Arden Green 2.5 Connie SE tourer.
What a pain - You have to connect the electrical plug BEFORE hanging the door, and after hanging, you can't get a spanner on the hinge to body bolts to adjust the fit!
As for releasing the two central clips hold the door card on...
Just the mirror to check its motors and refit.
|
if you have to do this job again it is far easyer to split the hinge if you look were the hince pivots there is a circlip/pin if you remove them ie top of each hinge the door lifts of then you just have to split the harnesss