The 75 and ZT Owners Club Forums - View Single Post

Andy24601 · 22nd May 2020, 19:46

I've now pulled all the fuses and checked them for continuity. I've soldered ring terminals on the earth wires and made sure they making good contact. I still have no indicator signal, no rev counter, no speedo and a/c in error mode. I read something about upsetting the BCU if you disconnect it and reconnect when it's on - possibly what I did when I touched the earth wires - come on guys, this must make sense to someone?

22nd May 2020, 19:46	#4
Andy24601 Regular poster Rover saloon Join Date: Oct 2019 Location: Southend-on-Sea Posts: 81 Thanks: 32 Thanked 39 Times in 16 Posts	Fried BCU? I've now pulled all the fuses and checked them for continuity. I've soldered ring terminals on the earth wires and made sure they making good contact. I still have no indicator signal, no rev counter, no speedo and a/c in error mode. I read something about upsetting the BCU if you disconnect it and reconnect when it's on - possibly what I did when I touched the earth wires - come on guys, this must make sense to someone?