Quote:
Originally Posted by p2driver
Hi everyone, I hope there is some good guy who can help me on here.
I have removed my very troublesome naval unit and reinstalled my original high line unit.Problem is I have no power to it. I cant remember if the large square connecter behind the head unit was connected to anything!? The Naval unit plugged into it but the High line unit just has two small plugs in the back.Its been 5 years since I took it out and I cant remember how it went!
I dont want to pull my dash apart looking for something that isnt there, can some kind soul point me in the right direction?
|
There should be a Hi Line loom fitted to enable your system to be re-installed.
The loom has a large square connector that plugs into your socket located near the head unit.
The loom also has the blue and white plugs that connects to your Hi Line head unit. [boardmonitor]
The rest of the loom goes back to the boot area to connect to amplifier, tv unit, cd player, sat nav aerial and radio aerial in the rear screen.
The picture below shows the blue and white plugs, marked board monitor. The large black plug is shown lower center.[plug 0395]
Dave T