The 75 and ZT Owners Club Forums - View Single Post

Devilish · 2nd February 2019, 23:40

On the end of your wiring loom you should have these plugs
75/ZT /MkI/MkII it is a factory standard.

The 6 pin plug should look like this from above

They plug into these sockets

75/ZT /MkI/MkII, they All start ALL PCB's from a 75/ZT and Land Rover Freelander ,when the engine is started and the ambient temp is 5°C

If the PCB originated from a BMW, Range Rover L322, etc, although identical, it will NOT start. Even if you do say Messiah.

2nd February 2019, 23:40	#8
Devilish Been round the block 75 Tourer Join Date: Apr 2009 Location: Cannock Posts: 4,126 Thanks: 3 Thanked 189 Times in 121 Posts	On the end of your wiring loom you should have these plugs 75/ZT /MkI/MkII it is a factory standard. The 6 pin plug should look like this from above They plug into these sockets 75/ZT /MkI/MkII, they All start ALL PCB's from a 75/ZT and Land Rover Freelander ,when the engine is started and the ambient temp is 5°C If the PCB originated from a BMW, Range Rover L322, etc, although identical, it will NOT start. Even if you do say Messiah. __________________ If at first you don't succeed, hide the evidence Last edited by Devilish; 2nd February 2019 at 23:56..