[DMGRS]

Another update (sorry!)
Following the successful fit, we've now had the 500 pairs put into production with an estimated completion time of mid-January - they'll then be shipped to us with an ETA of mid-to-end February.

The drain holes have been enlarged to 12mm to account for any variation in the isolator position - we have done a test fit and they line up well, but we thought best to have a tiny bit of 'wiggle room' to account for any batch variation and poorly fitting / worn isolators.

The total list of improvements are as follows:
- Coated inside and out with a good, thick layer of paint
- Slightly thicker metal used in all areas for added resilience
- Improved rear bush
- All brackets etc welded in exactly the right position
- All welds following the reference design with all notes from specialists (big shout out to Julian Anderson at JMA Cars and Marinabrian for their various notes over the years)

To avoid disappointment with regards to arrival dates we'll only be opening pre-orders once production is confirmed as finished around mid-January - however if you're absolutely desperate to have a set as soon as they land and can stand a little variation in delivery time please PM / email and we'll arrange an order earlier than this.