Quote:
Originally Posted by chas_1
I have for the last two hours been trying to remove the drivers side kick panel that holds the bonnet release lever and remote boot opening button.I have removed the clip nearest the pedal(black) but however I push and pull cut my fingers and loose my rag at the ****** thing its still sat there in position.Please someone put me out of my misery and tell me how to remove this so I can feed my power cable thru to the boot.I am installing an active sub so will post some pictures up when I have completed the job
Thanks
Chas
|
Pull the door seal off at the point it covers the metal clips attached to the rear of the trim, remove the fir tree button fixing at the rear of the panel.
Now gently ease the bottom out enough to get your fingers behind, then give it a sharp tug towrd the centre of the car, this will disengage the clip securing it to the A pillar.
Once you have done this, pull the bonnet release, and thread the trim over the bonnet catch.
Refitting is a reversal of removal
Have fun
Brian
