Quote:
Originally Posted by Blink
I don't think the exhaust centres over here would want to do the stretching/expanding work - they'd rather sell me one of their own systems.
That expander tool might work, although it's got some pretty mixed reviews (not strong enough etc) - here it is on Amazon UK https://www.amazon.co.uk/Toolzone-Ex.../dp/B002R33Q9K
Even if it is strong enough, there's a good chance the expander will tear the pipe open. The Klarius has two slots cut into the inlet pipe (similar to the slots visible in this pic). Expanding the pipe by force is likely to cause a tear starting at the closed end of each slot - that will just make matters worse. I found some videos online showing the expander tool in action - none of them show it being used on a pipe with slots. e.g. https://www.youtube.com/watch?v=0ax2UbCst2Q
Edit: Here's one but I can see any difference - https://www.youtube.com/watch?v=CJWtducrohA |
Do what the guy in the last video did. It will work. It won't split the pipe. If it doesn't stretch quite enough or easily for your liking maybe heat the pipe with a propane or butane torch and continue.
__________________
Southern Slovakia
Anything can happen in Formula 1 and usually does - Murray Walker
1999 Triumph Trophy 900, Saddlesore 1600, Iron Butt Riders Association #63720
2005 Rover 75 CDT Tourer MK2
|