Sheathed cable and yellow plug that is fixed to seat. Take usual precautions of disconnecting battery etc., then grab a hold of the plug and its mounting to seat and twist, anti-clockwise 90 degrees. The plug and its mounting will release up and off the seat base. The plug and connector can then be nipped and pulled apart, then treated with contact cleaner/wd40 or whatever, pushed in and out a few times to clean the contact surfaces and refitted, hopefully curing the problem (until the next time!).
__________________
Oil in my veins!
Last edited by roverbarmy; 22nd March 2019 at 14:26..
|