Quote:
Originally Posted by Arctic
|
Yes Steve, the "flare" design particularly being superior. However all the crow's foot attachments I have had measured are too wide to fit into the shroud (even 3/8 in. drive) surrounding the securing nut*. I've another to investigate on Monday morning but it's looking increasingly likely that using a torque wrench on this is going to be impossible (with the spring fitted).
Simon
* This is made more difficult by the nut size being increased from 15mm to 17mm.
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
Last edited by SD1too; 15th May 2021 at 07:22..
|