:bowdown
Quote:
Originally Posted by BillyRover
I've done it with the breaker bar - the bolts are out!!!
What's the consensus on the easiest way to split the wishbone from the subframe??
|
Quote:
Originally Posted by smudge.g
i found the post that suggests raising the suspension slightly with a jack, then slipping in a hammer head close to the bal-joint. Releasing the suspension, the hammer acts as a fulcrum and the spring tension litterally forces the balljoint apart! It took literally minutes with little or no hammering .
|
Not tried the above personally as I have always had success with my 7LB Lump Hammer Couple of hits and they usually surrender ! Heavier the hammer less bounce ! Thank Smudge for his input
If neither work Simon SD1too has had success with a two leg puller but up to now I have not had to resort to either other method !