Quote:
Originally Posted by AndyEll
Got a bit of play on one. Gonna replace it. Any advice?
|
As below, got them from Mat, but plenty about. I used a stilson wrench and then a pipe wrench to speed the job up. Actually a quick and easy job.
I changed both inner and outer at the same time. Screwed both inner and outer off the car reassembled on the bench (not forgetting the boot) and screwed them back onto the car.
Wheels and under-tray off, it went quite well.
Only ended up with 4mm toe-out.
__________________
Chrome skull caps, EGR cleaned (original housing), Mondeo lower mounting, 12V outlets in the armrest and tourer boot, cat fixed, working FBH, Lidl plenum covers, DD with reverse camera.New speakesr/Tweeters with MDF rings. wood dash, Memory leather seats, wooden finished steering and handbrake, Xenon headlights.
|