Quote:
Originally Posted by Arctic
Do a leak back test after you have checked the plenums, also tap the UBP while you try and start it, see if it fires up right away, pop the connector off it, and spray with contact cleaner, not WD/40
1
Also spray the connector on the end of the fuel rail.
2
When was the fuel filter last changed.
3
Sounds like an injector
Test kit below.
https://www.ebay.co.uk/itm/6-Cylinde....c100011.m1850
|
Thanks for the links. It will take a few days to get one of those.
Fuel filter was changed 18 months ago.
Fuel flow to filter looks good so pump seems to be delivering but can't check pressure.
Today I 'll change the fuel filter and spray contacts on fuel pump and rail with contact cleaner.
Check pleneum .
Thanks.