Quote:
Originally Posted by Arctic
Just to bring this into focus the mounts i have highlighted above will not fit the diesel as they are 15mm to high once in the holding cage on the front arm.
I found this out recently when i went to fit one to my tourer, unless someone knows different.
Original to the left.
1
2
The mount fits into the alloy cage on the diesel.
3
4
The height difference would throw the engine higher on that side by 15mm in my opinion as anyone fitted one of these to a diesel without any problem ?
Rimmers mount but then state below.
https://rimmerbros.com/Item--i-KKB101923
This part has been supersededUse KKB101914
Which is a petrol mount for 2.0 and 2.5 which is why its higher as it does not sit in a cage, it sits on the front chassis arm
Petrol mount fitting.
5
As opposed to the diesel mount.
6
|
If using KKB101914 on a diesel, does one do away with the metal housing so it is the right height? Do I assume the original mount that fits into the housing is KKB101923?
macafee2