The 75 and ZT Owners Club Forums - View Single Post

trebor · 11th September 2010, 12:45

just fitted mine pics below, i also used one of the " netting pieces " supplied
as instructed and held it by undoing one of the bolts passing through the netting and retightening.

The second picture is the passenger side of the car where you can see that there is already an OEM " shield " to stop the debris getting to the lower plenum on that side, Jules shield solve the problem on the other side which as he says was a design flaw

Great bit of kit, and easy to fit, go on order one !

11th September 2010, 12:45	#27
trebor This is my second home Rover 75 CDTi Connoisseur SE & MG ZT Saloon 190 Join Date: Jun 2007 Location: Coven Posts: 12,523 Thanks: 526 Thanked 1,877 Times in 885 Posts	just fitted mine pics below, i also used one of the " netting pieces " supplied as instructed and held it by undoing one of the bolts passing through the netting and retightening. The second picture is the passenger side of the car where you can see that there is already an OEM " shield " to stop the debris getting to the lower plenum on that side, Jules shield solve the problem on the other side which as he says was a design flaw Great bit of kit, and easy to fit, go on order one ! __________________ www.midlandsnanomeets.co.uk Robs Car Gallery Coven near Wolverhampton WV9 2000 Cowley Built Rover 75 2.0 V6 Club SE/ Atlantic Blue/ Sandstone/Walnut (daily driver) 2003 Land Rover Freelander 1 TD4 HSE Helsinki Blue/Black Leather (swmbo daily driver)