For the main switch white connector I usually press in the sides and wiggle it out. It can be a bit stiff.
But on the other doors, there is only a white connector. Look on either the top or the bottom and you will see a small white slit. That is what you will need to push a small screwdriver in, in order to release that clip.
as for the two centre clips for the card itself, pull the card slightly toward you to make sure the studs are free, then lift up the card. You will need a pair of mole grips to press the tangs flat in order to get the black plastic bits off the clips. These need to be replaced on the door card before re-ritting.
Just done 8 door cards so it is still fresh in my memory 
__________________
Mo was born Tuesday, 22nd June 2004 @ 08:32:41
This vehicle was the 99,307th 75 to run off the production line, out of 112,381
This vehicle was the 5,377th 75 1.8 Connoisseur to be made out of 6,033
This vehicle was the 783rd 75 in Firefrost Red (code: CEV) to be made out of 2,089 Firefrost Red 75s
|