Wet back seat ...and rust!
Hi,
I've had my 2002 75 Tourer off the road for a good few months due to me trying to wire up a tow bar (long story!!)
I took the rear seat out to route the wiring and noticed a pool of water under the back seat.
I'm going to work through the usual suspects, side vents, trim, tailgate seat, etc.
Under the rear seat is a large diameter steel this tube on the right hand side, that goes from the front of the wheel tub and turn through 90 degrees into the seat base and is part of the body shell.
What's it for? Mine has literally crumbled with rust on the under side.
https://photos.google.com/photo/AF1Q...gzCDJIW1sLls1Y
Thanks,
Richard
__________________
To Do: towbar,, stereo & speakers, autobox 'funny' behaviour (2-3 upshift delaying to 2800rpm, clunk on rev to forward change), FBH pcb & timer, rust proof, drivers cup holder.
Done: Full service,airbag dcu,pcv valve,aux belts, front discs & pads, 2 x rear springs, engine fan, cleaned plenum, plenum spyhole mod, bonnet catch divider mod, bonnet catches lubed, second key, x-power upgrade, aircon recharge,2nd acc socket, winter tyres on 15" rims, strut bearings, spring protectors,
|