Quote:
Originally Posted by MissMoppet
Am following MarinaBrian's (till now) excellent How to here
but when he says "the old bush can now be knocked rearwards off the arm" I give up. There ain't no room despite wedging various bits of timber. Please tell me what I'm doing wrong. (The nuts were a doddle)
Most grateful
Dave
|
I use one of two methods depending on the condition of the one im taking off. If it has already separated in to 2 halves then i use a hacksaw through the inner part to spread the inner steel ring. If like yours it is still fairly strong just a bit split, then i use a bearing puller from the back end, pressing the puller screw in to the tail end of the arm.
(Just like you, “knocking them off” never works for me either. My hammer must be too small)