I replaced my door finishers 2 years ago on my ZT with the help of this thread. My "new" ZT-T needed replacement so I went back to this thread discovering the pictures were missing. Bummer
So I decided to make some pictures myself and host them on my own picture gallery website making sure the pictures are available to anyone without the hassle of free hosters changing there EULA or such.
So here goes:
01 - Tools Used:
If you need the trim panel removal tools, look here:
https://www.aliexpress.com/item/32865746055.html
02 - Rusty door finisher:
03 - Peel back rubber from inside door finisher:
04 - peel back full length:
05 - Outside rubber:
06 - Remove rubber from finisher:
07 - Remove finisher:
08 - Remove finisher:
09 - Remove rust if applicable:
10 - Fitting new finisher (use a lubricant for easy fitting):
Refit the outside finisher and replace the cap. Clean the surface with a cloth soaked in a mild detergent.
11 - The result of your labour :-):
I hope these will be of use to you.