The 75 and ZT Owners Club Forums - View Single Post - Anti roll bar won't go on (rear)

Blink · 8th November 2019, 12:26

Can the ARB be fitted with no weight on the rear suspension?

I've loosely bolted the bar & U brackets to the car, and the droplinks to the upper arm brackets - and the holes at the ends of the bar will not reach the studs on the bottom end of the droplinks (they're about 1.5 inches apart). They might reach if the upper arm was moved up to its normal ride height (or they might not).

I've got the bar this way round - long straight on the LH, short straight on the RH.

Here's Rimmers diagram for reference. https://rimmerbros.com/Item--i-GRID001546

8th November 2019, 12:26	#1
Blink Posted a thing or two Rover 75 Saloon Join Date: Apr 2019 Location: Under the car Posts: 1,840 Thanks: 210 Thanked 244 Times in 221 Posts	Anti roll bar won't go on (rear) - help asap please Can the ARB be fitted with no weight on the rear suspension? I've loosely bolted the bar & U brackets to the car, and the droplinks to the upper arm brackets - and the holes at the ends of the bar will not reach the studs on the bottom end of the droplinks (they're about 1.5 inches apart). They might reach if the upper arm was moved up to its normal ride height (or they might not). I've got the bar this way round - long straight on the LH, short straight on the RH. Here's Rimmers diagram for reference. https://rimmerbros.com/Item--i-GRID001546 Last edited by Blink; 8th November 2019 at 12:28..